Impermeable Adhesive
Art. No : W160261
It is a one-component, polyurethane based adhesive and filling material. It fills more gaps than other adhesive groups however shear strengths are little lower than other adhesive groups. Can be used for glass porcelain, aluminum, steel, PVC and wood concrete without primer. It is recommended to use sandpaper on auto body joints, caravan container joints, ship constructions, shiny surfaces etc.
Usage: The surface on which the silicone will be used must be clean, dry and free from dust, oil, grease, rust etc. Before performing the repair work, remove the remnants of the old gasket. Apply a sufficient amount of the product on one side, wait for 10 minutes and then assemble the parts. Can be apply with a spatula (Use plastic or stainless steel tools). After the procedure, clean the tools with a paper towel and rinse with a solvent. For uncured silicone, we recommend using silicone remover. Do not apply at temperatures below 5 ºC.